HC132 Pet/Livestock

1.GPS + BDS + AGPS + LBS multiple positioning；

2. Support electronic fence function. Users draw/define virtual electronic fences through the platform/APP, and can be recognized and alerted by the platform when devices enter and exit the fence；

3. You can send an alarm text message/phone call to the monitoring number when an alarm occurs, and the alarm will be uploaded onto the platform at the same time；

4. The end point adopts industrial-grade high-stability GPRS module from well-known manufacturers, built-in GSM high-sensitivity antenna, supports TCP/IP data transmission, and supports domain name/Internet Protocol Address connection server； 

5. Built-in large-capacity storage chip, supports data storage in offline state, and supplementary transmission of blind spot data; when the pet is in a place with weak wireless signal or serious interference, temporarily store the pet’s walking data in FLASH, and when the wireless signal returns to normal, it can supplement the transmission of these data to achieve no omission of data； 

6. With a built-in 3-axis acceleration sensor, fused with an accurate acceleration algorithm, it can obtain the pet’s current attitude in real time and make other judgment； 

7. High-sensitivity GPS/BDS dual-star positioning module, anti-interference ceramic antenna, to achieve more stable star search signal, support AGPS fast positioning tracking, synchronous timing； 

8. Support online remote upgrade and remote configuration of product parameters； 

9. Historical track platform retains data for 180 days.

1. Please pay attention to waterproof for electronic products.
2. Please insert the SIM card before installation and make sure the SIM card is not set with password, otherwise the device can not work normally.
3. The USB port on the terminal device is for factory testing only, not for charging the device, please do not use it for charging or other purposes.
4. The installation location must be above a place that is not covered by electromagnetic wave-absorbing substances (e.g., metal, explosion-proof heat insulation film).
5. Do not expose the device to liquids or o1.Power supply method: Battery operated
2. Operating voltage range: DC 3.4V - 4.5V
3. Operating state Voltage/current: 4V/Average 59.8mA
4. Standby voltage/current: 4V/Average 4.8mA
5.Built-in battery capacity；4000 mAh (3.7V polymer battery)
6. Operating temperature range：-20℃ - 75℃
7 . Storage temperature range：-30℃ - 80℃
8.Working humidity range：10% -85% RH non-condensing
9 . Communication module brand/chip model： SIMCOM A7670SA-LASE
10. Communication frequency band：LTE/4G LTE-FDD:B1/B2/B3/B4/B5/B7/B8/B28/B66  GSM/2G 850/900/1800/1900MHz
10. SIM card: Nona SIM card
11. Communication antenna: Built-in FPC antenna
12. Positioning module brand/chip model: AT6558R
13. positioning method: BDS/GPS/AGPS/LBS
14. Cold start time：32 seconds on average
15 . Hot start time：1 second on average
16. Tracking sensitivity：-162 dBm
17. Positioning antenna： Built-in antenna
18. Antenna Specifications: 20mm×20mm×4mm
19. GPS band: L1:  1575.42±1.023MHz
20. Beidou band: B1:  1561.098±2.046MHz
21. Number of satellite channels: 64 22.Positioning accuracy: <2m（1σ）
23. Timing accuracy: <30ns（1σ）
24 . Velocity accuracy:<0.1m/s（1σ）
25.Magnetic charging port + serial port: 1 way
26. Speaker: 1 way
27. LED light: Charging light (red) + GPS (yellow) + 4G (blue) + recording pet light (white)
28. Host size: 82mm*49mm*38mm
29. Shell material: nylon plastic
30. IP protection level: IP67
31. Host weight: 143perate with wet hands.
6. Do not put the device into fire
7. The device may not work when the temperature is lower than -20℃ or higher than +60℃. 
8. When the vehicle is in the underground parking lot, tunnel or garage, it will affect the positioning signal. When the vehicle is in underground parking lot, tunnel or garage, it will affect the positioning signal, and there may be a blind area of communication network signal that causes the device can not monitor; when the vehicle drives out of the above area, the device will automatically return to normal work.
9. Do not repair the device by yourself when it encounters abnormal conditions. The manufacturer is not responsible for any damage caused by connecting non-original accessories or unplugging connections between parts.
10. This product is a safe driving aid, and we are not responsible for any damage caused by malfunction or loss of information.
11. This product has passed the international CE certification, but because of the complexity of the electromagnetic environment in the car, this product may cause electromagnetic interference with the electrical equipment in the car in some models. 
12. Do not install or operate this product while the vehicle is in motion. 
13. Do not connect the uninterruptible power supply without authorization, as this may cause the vehicle or the product to malfunction, and be sure to consult a professional regarding installation.
14. Do not subject the product to strong shocks or vibrations, which may damage the product and cause it to malfunction or become inoperable.
15. The temperature range for normal functioning of the product is from -20 degrees Celsius to 65 degrees Celsius, beyond which the product may malfunction, catch fire or explode.