HC152 Vehicle-mounted Mobile Video Recorder

description

1、Features: Built-in high-performance Hathi chipset, H.264/H.265 standard coding, high compression rate and image quality
AHD/TVI/CVI/IPC/ analog 5-in-1 video input, wide compatibility
4 + 1-way real-time preview and storage
1 channel synchronized audio/video output, 1 channel VGA output
Supports Uninterruptible Power Supply (UPS) input
Built-in gravity sensor to monitor driving habits
Reversing assistance: adjust camera image horizontally and vertically, rotate camera image by 90 degrees
2. Power supply:
Professional car power supply design, 8 - 36V DC wide voltage range
Multiple protection circuits for undervoltage, short circuit, reverse connection, etc.
Intelligent power management system, low voltage shutdown, low power consumption in standby mode.
Regularly report GPS information to the server with very low power consumption, compliant with JT/T794-2011 standard.
3、Data storage:
Built-in super capacitor to avoid data loss and disk damage caused by sudden power failure.
Special file management system encrypts and protects data
Proprietary technology detects bad disk tracks to ensure video continuity and long disk life
Support SD card storage, maximum 256GB
4.Transmission interface:
Support GPS / Beidou / GLONASS optional, high sensitivity, fast positioning
Support wireless download via WiFi, 802.11b/g/n, 2.4GHz
Support 3G/4G transmission, LTE/HSUPA/HSDPA/WCDMA/EVDO/TD-SCDMA”.

Inquire now

  • Product Introduction
  • frequently asked questions
  • precautions

1、Main Processor: Hi3520DV400
2、Operating system: Embedded Linux operating system
3、Operation Language: Chinese / English / Russian
4、Operator Interface: Graphical user interface, supports mouse and remote control
5、Password security: two-layer password (administrator / user)
6、Video Standard: PAL/NTSC
7、Video Compression: H.264/H264 + /H265/H265 +
8、Image resolution: 1080P/720P/960H/D1/CIF
9、Playback quality: 1080P/720P/960H/D1/CIF
10、Composite mode: multiple ways
11、Decoding capacity: 4-channel 1080P
12、Recording quality: 1 – 6 levels selectable
13、Image display: single screen / four screen optional
14、Audio compression: G.726/G.711
15、Audio recording: synchronized audio and video recording
16、Recording Mode: Manual / Alarm
17、Video bit rate: full frame 4096Mbps, 6 image quality options
18、Audio bit rate: 8KB/s
19、Storage media: SD card storage
20、Video query: query by channel/recording type/alarm type
21、Local playback: playback by channel and time
22、Upgrade Mode: Manual / Automatic / Remote / Emergency Recovery
23、Upgrade method: USB flash disk / wireless network / SD card
24、Audio/Video Input: 4-channel 4-pin aerial header + 1-channel 6-pin aerial header for IPC
25、Audio/Video Output: 1 channel VGA video output, 1 channel air head audio/video output
26、Alarm Inputs: 4 digital inputs (4 positive/negative triggers)
27、SD card: 1 SDXC high-speed card (maximum 256GB)
28、USB interface: 1 USB 2.0 (support U disk / mouse)
29、Ignition input: 1x ACC signal
30、Universal Asynchronous Transceiver (UART): 1x LVTTL level
31、LED Indicators: PWR/RUN/SD/ALM
32、Ethernet: 1x 6-pin Air Header to RJ45 (10M/100M) 750mA@12V
33、Infrared: 1x
34、Disk Lock: 1pc
35、Debug Port: 1pc
36、GPS / Beidou / GLONASS: Supports detecting antenna insertion / removal / short circuit.
2G/3G/4G: Support CDMA/EVDO/GPRS/WCDMA/FDD LTE/TDD LTE
37、WIFI: 802.11b/g/n, 2.4GHz
38、Power Input: 8V ~ 36V DC
39、Power Output: 5V 300mA
40、Power Consumption: Standby 8.5mA; Maximum Power Consumption 18W @12V 1.5A @24V 0.75A
41、Operating Temperature: – 20 – 70°C
42、Storage size: 1080P 1G / hour / channel; 720P 0.5G / hour / channel; 960H 0.38G / hour / channel
43、Size: 142 * 153 * 33mm”

Frequently Asked Questions Fault Description Handling method
Poor positioning signal Using the terminal in areas with poor reception, such as underneath a tall building or in a basement, it cannot effectively receive satellite airwaves. Use the terminal in a place with good signal.
Unable to turn on the computer Repeated switching on and off, the indicator light does not light up Turn on the terminal after 10 seconds with the switch turned OFF.
Unable to connect to the network SIM card is not properly installed Check the SIM card and reinstall it.
Dirt on the metal surface of the SIM card Please wipe it with a clean cloth.
IM card is damaged or invalid Replace the SIM card with a valid one Contact your service provider
Out of GSM service area Move to the service area of your network service provider
Weak signal Please move to a place with strong signal and try again
Can't find the location information GPRS service is not enabled on the SIM card Please contact your network service provider Enable GPRS service
SIM card is in arrears Recharge fee
Send command to modify the parameter does not change Wrong command format Please edit the command again and send it again
No reply to sent command Please make sure the terminal can connect to the network normally and enable the SMS function of the terminal SIM card.

1. Please pay attention to waterproof for electronic products.
2. Please insert the SIM card before installation and make sure the SIM card is not set with password, otherwise the device can not work normally.
3. The USB port on the terminal device is for factory testing only, not for charging the device, please do not use it for charging or other purposes.
4. The installation location must be above a place that is not covered by electromagnetic wave-absorbing substances (e.g., metal, explosion-proof heat insulation film).
5. Do not expose the device to liquids or operate with wet hands.
6. Do not put the device into fire
7. The device may not work when the temperature is lower than -20℃ or higher than +60℃. 
8. When the vehicle is in the underground parking lot, tunnel or garage, it will affect the positioning signal. When the vehicle is in underground parking lot, tunnel or garage, it will affect the positioning signal, and there may be a blind area of communication network signal that causes the device can not monitor; when the vehicle drives out of the above area, the device will automatically return to normal work.
9. Do not repair the device by yourself when it encounters abnormal conditions. The manufacturer is not responsible for any damage caused by connecting non-original accessories or unplugging connections between parts.
10. This product is a safe driving aid, and we are not responsible for any damage caused by malfunction or loss of information.
11. This product has passed the international CE certification, but because of the complexity of the electromagnetic environment in the car, this product may cause electromagnetic interference with the electrical equipment in the car in some models. 
12. Do not install or operate this product while the vehicle is in motion. 
13. Do not connect the uninterruptible power supply without authorization, as this may cause the vehicle or the product to malfunction, and be sure to consult a professional regarding installation.
14. Do not subject the product to strong shocks or vibrations, which may damage the product and cause it to malfunction or become inoperable.
15. The temperature range for normal functioning of the product is from -20 degrees Celsius to 65 degrees Celsius, beyond which the product may malfunction, catch fire or explode.